Hexbyte Glen Cove Turning tree bark and compost into aircraft wings and plastic bags thumbnail

Hexbyte Glen Cove Turning tree bark and compost into aircraft wings and plastic bags

Hexbyte Glen Cove

Biopolymers derived from trees and crops are already used to make car interiors. Credit: Monsterkoi / Pixabay

Trees, crops and even organic waste can be transformed into a bewildering array of plastics to use in products ranging from single-use bags to heavy-duty airplane wings.

These so-called biopolymers could play a vital role in weaning us off petroleum plastics—which will help cut greenhouse gas emissions, and ensure plastics come from a renewable resource.

And in some cases they could help to reduce pollution. One of the major sources of plastic pollution is packaging, which accounted for nearly 40% of the plastic used in the EU in 2019, according to Plastics Europe, a trade association.

Researchers have developed ways to make biodegradable food waste bags and food packaging from municipal food and garden waste.

“You are transforming organic waste to make a waste bag, which is biodegradable. So you are closing the cycle—you don’t use other materials to make the (plastic) bag,” said Thomas Dietrich, an engineer in biotechnology at Spain’s TECNALIA, a research and technological development center.

Dietrich is project manager of a project called VOLATILE, which has developed a technology that can be integrated into existing municipal anaerobic digestion and composting plants. It uses microorganisms to break down into volatile fatty acids, which are the building blocks of the PHB and PHBV plastics used to make plastic bags and food packaging.

The main by-product is a residue which can be used to make compost. Hydrogen gas is another by-product, and it can be used to make electricity.


Using biowaste to produce could help solve a major challenge caused by the majority of biodegradable plastics currently being used.

“Normally the big (industries) selling (biodegradable plastics) on the market use food-grade agricultural materials,” said Dietrich.

Because of the volumes needed, it will not be possible to use agricultural produce to replace petroleum-based packaging without competing with food crops or biofuels for agricultural land, said Dietrich.

“So we have to try to keep organic carbon in the economy without falling back on agriculture,” he said.

Plastic bags and packaging made with VOLATILE’s technology would end up in household biowaste and in theory could be used once more to produce volatile fatty acids—although this has not yet been tested by the VOLATILE team.

One of the main challenges to this type of system is the lack of composting plants in most regions of the world, including Europe.

Across the EU, up to 50% of municipal solid waste is organic, and only about 40% of biowaste is recycled into high-quality compost and digestate, says the European Compost Network. The majority goes to landfill or for incineration.

However, this is likely to improve. The European Environment Agency says recycling more municipal bio-waste is ‘crucial’ for meeting EU targets to recycle and reuse at least 60% of all waste by weight by 2030.


Whether plastics are biodegradable or not is due to their chemical composition—not their origins. So petroleum-based plastics can be biodegradable, and plant-based ones can be non-biodegradable.

However, a shift to biopolymers would help reduce greenhouse gas emissions produced to make the plastics—even if the end product is not biodegradable.

Whether plastics are biodegradable or not is due to their chemical composition – not their origins. So petroleum-based plastics can be biodegradable, and plant-based ones can be non-biodegradable. Credit: Sven Brandsma / Unsplash

“We need to achieve this (shift) in 10, or maximum 15, years because the climate stakes are so high,” said Vincent Placet, a research engineer at the FEMTO-ST Institute in France.

“The quantity of CO2 emitted to produce wood and plants is very low,” said Placet, adding that they also absorb atmospheric CO2 during growth. He coordinates a project called SSUCHY, which is developing load-bearing bio-based composites for use in automotive and aerospace industries.

Biopolymers derived from trees and crops are already used to make car interiors.

Other biopolymers are being developed to be load-bearing. These include thermoset plastics which are designed to last up to 30 years under harsh conditions—in airplane wings and bodies for example.

Some of the most widely used thermoset plastics are epoxies, which are used in composite materials. Composite materials comprise up to 50% of the latest airplanes by weight.

“We have produced a fully bio-based epoxy. Now the main issue is scaling it up,” said Placet.

To scale up, an entire supply chain needs to be created, starting with finding suppliers of the plant materials, he says.

One option is to use waste from forestry—tree bark, branches and roots. “It’s available in very large quantities and not used in any other application. In northern Europe, the feedstock is very large and we know it can answer the needs for this type of epoxy polymer,” said Placet.

Another challenge is how to make the processing greener and more cost competitive than their petrochemical equivalents. Petrochemical epoxies are cheaper to produce and use less power and solvents. However, some of those efficiencies are because they are done on an industrial scale instead of in a laboratory, Placet says.

“It’s doable from a technical point of view,” but more investment is needed to scale up and build the necessary value chains, he added.


Globally, bio-based plastics comprise about 1% of the 368 million tons of plastic produced annually, says European Bioplastics.

Sourcing the remaining 99% from plants ‘is not an option,” says Sander Defruyt, head of the New Plastics Economy, an initiative of the UK-based Ellen MacArthur Foundation to redesign the future of plastics.

“Where is all that biomaterial going to come from, in a way that is regenerative and not depleting our ecosystems? The demands on our ecosystems will just go through the roof, and we’re already crossing planetary boundaries today,” he added.

Even biodegradable plastics will have limited impact on reducing plastic pollution because most of the world’s regions do not have the necessary industrial composting facilities, Defruyt says.

Addressing —and solving our reliance on petroleum-based plastics—requires eliminating all unnecessary plastics, and reusing the plastics that are needed, to keep them out of the environment.

After that, ‘the very little virgin plastic that we still need … will need to be shifted from fossil-based sources to regeneratively sourced bio-based plastics to stop that systems-dependence on finite fossil resources,” said Defruyt.

More information:
Biowaste derived volatile fatty acid platform for biopolymers, bioactive compounds and chemical building blocks cordis.europa.eu/project/id/720777

Turning tree bark and compost into aircraft wings and plastic bags (2021, May 31)
retrieved 31 May 2021
from https://phys.org/news/2021-05-tree-bark-compost-aircraft-wings.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.

Read More Hexbyte Glen Cove Educational Blog Repost With Backlinks —

Hexbyte Glen Cove Turning wood into plastic thumbnail

Hexbyte Glen Cove Turning wood into plastic

Hexbyte Glen Cove

Credit: Unsplash/CC0 Public Domain

Efforts to shift from petrochemical plastics to renewable and biodegradable plastics have proven tricky—the production process can require toxic chemicals and is expensive, and the mechanical strength and water stability is often insufficient. But researchers have made a breakthrough, using wood byproducts, that shows promise for producing more durable and sustainable bioplastics.

A study published in Nature Sustainability, co-authored by Yuan Yao, assistant professor of industrial ecology and sustainable systems at Yale School of the Environment (YSE), outlines the process of deconstructing the porous matrix of natural wood into a slurry. The researchers say the resulting material shows a high , stability when holding liquids, and UV-light resistance. It can also be recycled or safely biodegraded in the natural environment, and has a lower life-cycle when compared with petroleum-based plastics and other .

“There are many people who have tried to develop these kinds of polymers in , but the mechanical strands are not good enough to replace the plastics we currently use, which are made mostly from fossil fuels,” says Yao. “We’ve developed a straightforward and simple manufacturing process that generates biomass-based plastics from wood, but also plastic that delivers good mechanical properties as well.”

To create the slurry mixture, the researchers used a wood powder—a processing residue usually discarded as waste in lumber mills—and deconstructed the loose, porous structure of the powder with a biodegradable and recyclable deep eutectic solvent (DES). The resulting mixture, which features nanoscale entanglement and hydrogen bonding between the regenerated lignin and cellulose micro/nanofibrils, has a high solid content and high viscosity, which can be casted and rolled without breaking.

Yao then led a comprehensive life cycle assessment to test the environmental impacts of the against commons plastics. Sheets of the bioplastic were buried in soil, fracturing after two weeks and completely degrading after three months; additionally, researchers say the bioplastic can be broken back down into the slurry by mechanical stirring, which also allows for the DES to be recovered and reused.

“That, to me, is what really makes this plastic good: It can all be recycled or biodegraded,” says Yao. “We’ve minimized all of the materials and the waste going into nature.”

The bioplastic has numerous applications, says Liangbing Hu, a professor at the Center for Materials Innovation at the University of Maryland and co-author of the paper. It can be molded into a film that can be used in plastic bags and packaging—one of the major uses of plastic and causes of waste production. Hu also says that because the bioplastic can be molded into different shapes, it has potential for use in automobile manufacturing, as well.

One area the research team continues to investigate is the potential impact on forests if the manufacturing of this bioplastic is scaled up. While the process currently uses wood byproducts in manufacturing, the researchers say they are keenly aware that large-scale production could require usage of massive amounts of , which could have far-reaching implications on forests, , ecosystems and climate change, to name a few.

Yao says the research team has already begun working with a forest ecologist to create forest simulation models, linking the growth cycle of forests with the manufacturing process. She also sees an opportunity to collaborate with people who work in forest-related fields at YSE—an uncommon convenience.

“It’s not often an engineer can walk down the hall and talk to a forester,” says Yao.

More information:
A strong, biodegradable and recyclable lignocellulosic bioplastic, Nature Sustainability (2021). DOI: 10.1038/s41893-021-00702-w

Turning wood into plastic (2021, March 25)
retrieved 26 March 2021
from https://phys.org/news/2021-03-wood-plastic.html

Read More Hexbyte Glen Cove Educational Blog Repost With Backlinks —